Combination masthead & white all round lights are for use on sail or power driven vessels under 20 meters. Stow-away plug-in-type. Three mile visibility. Clear lenses. Complete with two 12 volt bulbs. Black plastic and chrome plated zinc tops. 3/4" diameter anodized aluminum tubes. Waterproof cover for bases. Chrome plated zinc mounting bracket. Plastic adapters for flat or "V" type 45 degree windshields. Screw size is 8. Use spare lens PKO 278DPWHT. Horizontal mount. Dimensions 27" x 20-3/4".

Softie Windshield The Softie Windshield is a slip on open cell foam, with an integral fitted fur cover. The Softie will reduce wind noise and protect your microphone, and is the standard world-wide in TV. Available in a large range of sizes to fit most popular microphones. The main component of the Softie mount is a one piece rubber (actual material: EPDM) diaphragm shockmount. This unit is extremely robust, and has been tested in all environment conditions to ensure it performs. The Softie Mount comes in three sizes, depending on which microphone being used: Small Hole 19-20mm diameter Medium Hole 21-22mm diameter Large Hole 24-25mm diameter The mounts are 58mm diameter x 56mm long, and support short to medium length shotgun microphones. The Softie mount will only fit shotgun... Less

Windshield mounting kit for HomePatrolInclude d in the kit:Heavy duty 3 1/2 inches Suction Mount Adjustable 7 inches Arm HomePatrol Mobile Mounting BracketBracket mounting screws and nutsRead our Road Test in the Scanner Master Blog

Rycote Full Windshield 3 Kit - Small Modular Suspension Mount - Windshield # 3 - Windjammer # 3.The Rycote Windshield Kit # 3 is a complete modular microphone windshield system including the Rycote modular suspension mount, windjammer, windshield and necessary extensions. The windshield provides optimum protection against wind and the kit is a useful solution for those who do not already own a suspension mount or windjammer. The Rycote Windshield kits are available in up to 8 different configurations and are identified as systems 1 through 8. Each custom configured system will include the correct combination of suspension mount, windjammer, windshield and extensions (whenever necessary) to accommodate the size requirements for use with your specific microphone.

Replace that scratched, broken or otherwise damaged plastic on your ride with a direct replacement windshield from Rifle All Rifle windshields are made from 3/16 in. ICI Lucite L® - up to 50 percent thicker than stock shieldsL

Search Store Sign up for Store newsletter Email | Apple HTC Motorola Blackberry Samsung 100 PIECES New CAR MOUNT WINDSHIELD HOLDER UNIVERSAL Mobilworx brand window mount is suitable for any model of mobile phone/Mp4/PDA or GPS. 360 degree rotating support holder with fast release button. Convenient and easy to use Compatible with Apple iPhone Accessory only.Device not included! Shipping Payment Return Policy Contact Us We ship ALL in-stock orders on the same day or the next business day after c

Rycote Full Windshield 2 Kit - Small Modular Suspension Mount - Windshield # 2 - Windjammer # 2.The Rycote Windshield Kit # 2 is a complete modular microphone windshield system including the Rycote modular suspension mount, windjammer, windshield and necessary extensions. The windshield provides optimum protection against wind and the kit is a useful solution for those who do not already own a suspension mount or windjammer. The Rycote Windshield kits are available in up to 8 different configurations and are identified as systems 1 through 8. Each custom configured system will include the correct combination of suspension mount, windjammer, windshield and extensions (whenever necessary) to accommodate the size requirements for use with your specific microphone.

Rycote Full Windshield 4 Kit - Medium Modular Suspension Mount - Windshield # 4 - Windjammer # 4.The Rycote Windshield Kit # 4 is a complete modular microphone windshield system including the Rycote modular suspension mount, windjammer, windshield and necessary extensions. The windshield provides optimum protection against wind and the kit is a useful solution for those who do not already own a suspension mount or windjammer. The Rycote Windshield kits are available in up to 8 different configurations and are identified as systems 1 through 8. Each custom configured system will include the correct combination of suspension mount, windjammer, windshield and extensions (whenever necessary) to accommodate the size requirements for use with your specific microphone.

Rycote Full Windshield 1 Kit - Small Modular Suspension Mount - Windshield # 1 - Windjammer # 1.The Rycote Windshield Kit # 1 is a complete modular microphone windshield system including the Rycote modular suspension mount, windjammer, windshield and necessary extensions. The windshield provides optimum protection against wind and the kit is a useful solution for those who do not already own a suspension mount or windjammer. The Rycote Windshield kits are available in up to 8 different configurations and are identified as systems 1 through 8. Each custom configured system will include the correct combination of suspension mount, windjammer, windshield and extensions (whenever necessary) to accommodate the size requirements for use with your specific microphone.

Prevent wind interference in the field with RODE's Blimp! The RODE Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 12" in length. The adjustable dual-hoop suspension system limits the amount of noise generated by moving the mic around while capturing audio. For additional wind protection, the Blimp comes with a Dead Wombat windshield and a tail cable is included. For a pro solution for field recording, it's the Blimp!RODE Blimp Features:Greatly reduces handling and wind noiseAccommodates most shotgun microphones up to 12" (325mm) in lengthAdjustable dual hoop suspension systemDead Wombat windshield and tail cable includedRODE Blimp compatible microphones: RODE: NTG-1, NTG-2,... Less

Dii Windshield Mount *IMPORTANT* - To guarantee this item fits your vehicle you must first select your vehicle year, make, and model from the Compatibility table (using the drop down boxes, and press Go ) and click on the Notes column. This will tell you if the item fits your Sub Model, Engine, Body Style, etc. If there are no notes to view then it fits all models. Sheet Metal Policies Please Read Before Ordering Item Specifics Availability: Usually ships in 3-4 business days Condition: New Bra

National Cycle Quick Release windshield mounting kit KIT-Q103 Innovative Quick Release Mounting System for SwitchBlade Shields This fork mount hardware system secures your SwitchBlade windshield with bulldog tenacity, but looks attractive and refined when the shield is off. Innovative cushion wheel spools turn and flex, allowing the shield to lock into place with a reassuring pop. And there are versions to fit most popular cruiser motorcycles and front fork tube styles. Fits windshield part # 5

Rycote Full Windshield 5L Kit - M3 Large Modular Suspension Mount - Windshield # 4 - Windjammer # 5 - Extension # 1.The Rycote Windshield Kit # 5L is a complete modular microphone windshield system including the Rycote modular suspension mount, windjammer, windshield and necessary extensions. The windshield provides optimum protection against wind and the kit is a useful solution for those who do not already own a suspension mount or windjammer. The Rycote Windshield kits are available in up to 8 different configurations and are identified as systems 1 through 8. Each custom configured system will include the correct combination of suspension mount, windjammer, windshield and extensions (whenever necessary) to accommodate the size requirements for use with your specific microphone.

Replace that scratched, broken or otherwise damaged plastic on your ride with a direct replacement windshield from Rifle All Rifle windshields are made from 3/16 in. ICI Lucite - up to 50 percent thicker than stock shields LCII

Chrome Plated Zinc With Black Plastic Knob. Overall 12\ Long. Length Adjustment Is 9-1/2\". Screw Size Is #8. 2 Per Card. Offset Mount Offset Mount Part Number(s): PKO 1291DP0CHR PKO-1291DP0CHR PKO_1291DP0CHR PKO1291DP0CHR 9-1291DP0CHR "

Rycote Full Windshield 6 Kit - Medium Modular Suspension Mount - Windshield # 4 - Windjammer # 6 - Extension # 2.The Rycote Windshield Kit # 6 is a complete modular microphone windshield system including the Rycote modular suspension mount, windjammer, windshield and necessary extensions. The windshield provides optimum protection against wind and the kit is a useful solution for those who do not already own a suspension mount or windjammer. The Rycote Windshield kits are available in up to 8 different configurations and are identified as systems 1 through 8. Each custom configured system will include the correct combination of suspension mount, windjammer, windshield and extensions (whenever necessary) to accommodate the size requirements for use with your specific microphone.

Allows installation and removal of Memphis Shades windshield in less than one minute CNC-machined aluminum plates and stainless steel bolts Note: 1988-92 Springer require headlight relocation Note: Light bar must be curved style to allow installation of upper bolt and spool

Replace that scratched, broken or otherwise damaged plastic on your ride with a direct replacement windshield from Rifle All Rifle windshields are made from 3/16 in. ICI Lucite - up to 50 percent thicker than stock shields LCII

Genuine Beltronics / Escort Super Cup Suction type Winshield Mount for Radar and laser detectors Heavy duty mount suction cup mount which securely holds your Beltronics or Escort radar detector and provides a single quick release for fast removal Works with the following Models and possibly others: Beltronics: GX65 STi Driver RX65 RX65 Blue RX55 Vector 955 Vector 995 Vector 940

Looking to protect your boat with a great fitting cover? Look no further. Carver Styled-to-Fit boat covers are available in over 60 styles to ensure you get the best fitting cover available. By taking into account standard boat type features, such as a walk-thru windshield or bow rails, a styled-to-fit boat cover is able to provide a fit snug enough for trailering, provided a tie down kit is used (sold separately). Tie-down loops with double reinforced sewing are spaced every 2-3 feet around the hem. 1/4 inch shock cord ensures your cover will fit tightly around the hull. Our materials are breathable, water repellent, and mildew resistant. Choose from 10 oz. Cotton (1 year warranty), 11 oz. Poly-Cotton (3 year warranty), or 8 oz. Performance Poly-Guard (5 year warranty). Made in the USA.

The overhead three gauge mount is located above your windshield rearview mirror. It installs by sliding up under the factory headliner and with mushroon tape to the windshield. It is one of the most popular mounts as the visibility of the gauges is excellent and the view for the driver is totally unobstructed. 1999-2004 Ford Super Duty F250/F350/F450 Trucks. Autometer: 18017

Search Store Sign up for Store newsletter Email | Apple HTC Motorola Blackberry Samsung LOT OF 100 CAR MOUNT WINDSHIELD HOLDER For iphone Mobilworx brand window mount is suitable for any model of mobile phone/Mp4/PDA or GPS. 360 degree rotating support holder with fast release button. Convenient and easy to use Compatible with Apple iPhone 3G Accessory only.Device not included! Shipping Payment Return Policy Contact Us We ship ALL in-stock orders on the same day or the next business day after c

Jeep CJ7 Wrangler CARR Windshield Mount Light Bar - Titanium Silver Powder Coat 1976 / 1995 - CARR Jeep Windshield Mount Light Bars are designed to fit the popular Jeep CJ and Wrangler series.**Due to the size and weight of various lights, we caution you against exceeding the suggested maximum number of lights per bar listed below.DO NOT mount more than THREE 6 x 9 rectangular lights on a light bar.DO NOT mount more than FOUR 6-inch round lights on light bar.DO NOT mount more than FIVE 5 x 7 rectangular lights on light bar. -- Make: Jeep -- Model: CJ7 -- Years: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995

Looking to protect your boat with a great fitting cover? Look no further. Carver Styled-to-Fit boat covers are available in over 60 styles to ensure you get the best fitting cover available. By taking into account standard boat type features, such as a walk-thru windshield or bow rails, a styled-to-fit boat cover is able to provide a fit snug enough for trailering, provided a tie down kit is used (sold separately). Tie-down loops with double reinforced sewing are spaced every 2-3 feet around the hem. 1/4 inch shock cord ensures your cover will fit tightly around the hull. Our materials are breathable, water repellent, and mildew resistant. Choose from 10 oz. Cotton (1 year warranty), 11 oz. Poly-Cotton (3 year warranty), or 8 oz. Performance Poly-Guard (5 year warranty). Made in the USA.

Looking to protect your boat with a great fitting cover? Look no further. Carver Styled-to-Fit boat covers are available in over 60 styles to ensure you get the best fitting cover available. By taking into account standard boat type features, such as a walk-thru windshield or bow rails, a styled-to-fit boat cover is able to provide a fit snug enough for trailering, provided a tie down kit is used (sold separately). Tie-down loops with double reinforced sewing are spaced every 2-3 feet around the hem. 1/4 inch shock cord ensures your cover will fit tightly around the hull. Our materials are breathable, water repellent, and mildew resistant. Choose from 10 oz. Cotton (1 year warranty), 11 oz. Poly-Cotton (3 year warranty), or 8 oz. Performance Poly-Guard (5 year warranty). Made in the USA.

Made from .177 in. thick clear polycarbonate Mounts to roll bar using stainless steel rubber coated mount straps Protect yourself from the elements Included Items: (1) Full Windshield (8) 1/4-20x11

Windshield Suction Mount Stand Holder for TomTom GPS Product Information Product Introduction: An extra holder and car charger for a second car. If you use more than one car or share your TomTom ONE XL, you can make it even easier to travel with your TomTom ONE XL. Product Specification: Compatible with: TomTom ONE 125, ONE 125 SE, ONE 130, ONE 130-S, ONE 140, ONE 140-S TomTom XL 325, XL 325-S, XL 330, XL 330-S, XL 335-S, XL 335 LE, XL 340, XL 340-S, XL 350T, XL 350M, XL 350 TomTom XXL 530-S, XXL 535-T, XXL 540-S, XXL 550, XXL 550T Package Content: 1x Stand Holder for TomTom One

Looking to protect your boat with a great fitting cover? Look no further. Carver Styled-to-Fit boat covers are available in over 60 styles to ensure you get the best fitting cover available. By taking into account standard boat type features, such as a walk-thru windshield or bow rails, a styled-to-fit boat cover is able to provide a fit snug enough for trailering, provided a tie down kit is used (sold separately). Tie-down loops with double reinforced sewing are spaced every 2-3 feet around the hem. 1/4 inch shock cord ensures your cover will fit tightly around the hull. Our materials are breathable, water repellent, and mildew resistant. Choose from 10 oz. Cotton (1 year warranty), 11 oz. Poly-Cotton (3 year warranty), or 8 oz. Performance Poly-Guard (5 year warranty). Made in the USA.

Made from .177 in. thick clear polycarbonate Mounts to roll bar using stainless steel rubber coated mount straps Protect yourself from the elements Included Items: (1) Full Windshield (8) 1/4-20x11

Made from .177 in. thick clear polycarbonate Mounts to roll bar using stainless steel rubber coated mount straps Protect yourself from the elements Included Items: (1) Full Windshield (8) 1/4-20x11