The Thomson Elite 330-367mm Seatpost is machined from one piece of 7000 aluminum.Post and cradle are machined from one piece of AL- 7000Accommodates seat tube angles of 62 deg or more41mm seat rail grip lengthItem SpecificationsCol orBlackWeight220g Length330mmMateri al7000 AluminumSeatpost Diameter25. 4mmOffset0mmMinim um Height28mmMax Height265mmSeatpo st TypeRigidClamp StyleStd RailsDefined ColorBlack

The THOMSON Elite 27.2mm seatpost offers superior strength and minimum weight. Tube and head are integral- machined from a single piece of high-strength 7000-series aluminum, allowing higher strength at lower weights. Natural ellipse bore inside tube provides optimum strength-to-weight ratio. Long 1.6 in. (41 mm) seat rail grip length helps prevent the seat rail from bending due to impact loads. Design incorporates a bending fuse to prevent catastrophic failure. Clamp, head and upper tube are strong enough to withstand 350 foot-pounds of torque. Impact absorbing clamps; clamps, head and assembly will spread and flex on impact to protect seat, rails, seatpost and rider. Infinite tilt adjustment; -5° and +29°. Low-profile clamps prevent seat interference; swivel nuts are down between the... Less

The Masterpiece series is light as a feather. Strong as a Thomson. Designed for the serious cyclist. The post weighs approx 40 grams less than the elite due to machining off the excess and holding higher tolerances. Length: 240mm, Weight: 158g

Over 40% stronger on ultimate strength test than the strongest production seatposts on the market The tube and head of the Thomson seatpost are integral- machined from one single piece of high strength 7000 series aluminum. Natural ellipse bore inside tube for optimum strength to weight ratio. Long 1.614 inch (41 mm) seat rail grip length, this helps prevent seat rail bending from impact loads. Clamp, head, and upper tube strong enough to withstand 350 foot-lbs of torque, under severe impact the Thomson seatpost would bend slightly and allows the rider to come to a safe stop or finish the ride. Lightweight - approximately 188 grams (250 length) for road bikes and 228 grams (330 length) for mountain bikes. Every component of the Thomson seatpost is 100 percent American

Thomson Elite Mountain Seatpost. The Thomson Elite Mountain Seatpost has over double the fatigue life of any other mountain seatpost. Production models Thomson seatposts are integral- machined from one single piece of high strength 7000 series aluminum. The head is not pressed or bonded in. This allows for superior strength and minimum weight, allowing higher strength at low weights.

The THOMSON Elite 31.6mm seatpost offers superior strength and minimum weight. Tube and head are integral- machined from a single piece of high-strength 7000-series aluminum, allowing higher strength at lower weights. Natural ellipse bore inside tube provides optimum strength-to-weight ratio. Long 1.6 in. (41 mm) seat rail grip length helps prevent the seat rail from bending due to impact loads. Design incorporates a bending fuse to prevent catastrophic failure. Clamp, head and upper tube are strong enough to withstand 350 foot-pounds of torque. Impact absorbing clamps; clamps, head and assembly will spread and flex on impact to protect seat, rails, seatpost and rider. Infinite tilt adjustment; -5° and +29°. Low-profile clamps prevent seat interference; swivel nuts are down between the... Less

The Thomson Elite 330-367mm Seatpost is machined from one piece of 7000 aluminum.Post and cradle are machined from one piece of AL- 7000Accommodates seat tube angles of 62 deg or more41mm seat rail grip lengthItem SpecificationsCol orBlackWeight220g Length330mmMateri al7000 AluminumSeatpost Diameter28. 6mmOffset0mmMinim um Height28mmMax Height265mmSeatpo st TypeRigidClamp StyleStd RailsDefined ColorBlack

We've long been fans of the Thomson Elite seatpost. Why? It's nicely light, it allows you to nose your saddle up/down with infinite adjustability, and it has no setback -- perfect for riders whose less-than-Yoga-mas ter flexibility and/or short femurs cause them to be more comfortable further ahead of the bottom bracket. Nevertheless, Thomson's post is made from aluminum and aluminum has its drawbacks -- you can't make it look much better than sort of cool, and you can't give it the lightness of super high-end carbon fiber.Easton comes to the rescue with their EC90 Zero Setback Carbon seatpost. It's full carbon, including the head, and you get loads of durability thanks to the fact that it makes use of Easton's Taperwall technology. The post and the head are part of a monocoque design... Less

We've long been fans of the Thomson Elite seatpost. Why? It's nicely light, it allows you to nose your saddle up/down with infinite adjustability, and it has no setback -- perfect for riders whose less-than-Yoga-mas ter flexibility and/or short femurs cause them to be more comfortable further ahead of the bottom bracket. Nevertheless, Thomson's post is made from aluminum and aluminum has its drawbacks -- you can't make it look much better than sort of cool, and you can't give it the lightness of super high-end carbon fiber.Easton comes to the rescue with their EC90 Zero Setback Carbon seatpost. It's full carbon, including the head, and you get loads of durability thanks to the fact that it makes use of Easton's Taperwall technology. The post and the head are part of a monocoque design... Less

The THOMSON Elite 30.9mm seatpost offers superior strength and minimum weight. Tube and head are integral- machined from a single piece of high-strength 7000-series aluminum, allowing higher strength at lower weights. Natural ellipse bore inside tube provides optimum strength-to-weight ratio. Long 1.6 in. (41 mm) seat rail grip length helps prevent the seat rail from bending due to impact loads. Design incorporates a bending fuse to prevent catastrophic failure. Clamp, head and upper tube are strong enough to withstand 350 foot-pounds of torque. Impact absorbing clamps; clamps, head and assembly will spread and flex on impact to protect seat, rails, seatpost and rider. Infinite tilt adjustment; -5° and +29°. Low-profile clamps prevent seat interference; swivel nuts are down between the... Less

Thomson Elite Road Seatpost. The Thomson Elite Road Seatpost has over double the fatigue life of any other production models. Thomson road seatposts are integral- machined from one single piece of high strength 7000 series aluminum. The head is not pressed or bonded in. This allows for superior strength and minimum weight, allowing higher strength at low weights. Long 1.614 inch (41 mm) seat rail grip length. 250mm in length. 188 grams. 27.2mm

The Thomson Elite 410mm Seatpost accommodates seat tube angles of 62 deg or more.Post and cradle are machined from one piece of 7000 aluminumAccommoda tes seat tube angles of 62 deg or more41mm seat rail grip lengthItem SpecificationsCol orBlackWeight265g Length410mmMateri al7000 AluminumSeatpost Diameter30mmOffse t0mmMinimum Height28mmMax Height335mmSeatpo st TypeRigidClamp StyleStd RailsDefined ColorBlack

The Thomson Elite 330-367mm Seatpost is machined from one piece of 7000 aluminum.Post and cradle are machined from one piece of AL- 7000Accommodates seat tube angles of 62 deg or more41mm seat rail grip lengthItem SpecificationsCol orBlackWeight220g Length330mmMateri al7000 AluminumSeatpost Diameter30mmOffse t0mmMinimum Height28mmMax Height265mmSeatpo st TypeRigidClamp StyleStd RailsDefined ColorBlack

Visit Our Store Payment Info About Us Contact Us Checkout Thomson Elite 30.8mm x 410mm Black Seatpost This Thomson Elite seatpost accommodates seat tube angles of 62 deg or more. Post and cradle are machined from one piece of 7000 aluminum 41mm seat rail grip length Color: Black Weight: 265 grams Length: 410mm Material: 7000 Aluminum Seatpost Diameter: 30.8mm Offset: 0mm Minimum Height: 28mm Max Height: 335mm Seatpost Type: Rigid Clamp Style: Standard Rails Bikewagon ID: QBP-ST734

The Thomson Elite 410mm Seatpost accommodates seat tube angles of 62 deg or more.Post and cradle are machined from one piece of 7000 aluminumAccommoda tes seat tube angles of 62 deg or more41mm seat rail grip lengthItem SpecificationsCol orSilverWeight265 gLength410mmMater ial7000 AluminumSeatpost Diameter27. 2mmOffset0mmMinim um Height28mmMax Height335mmSeatpo st TypeRigidClamp StyleStd RailsDefined ColorSilver

Thomson Elite Mountain Seatpost. The Thomson Elite Mountain Seatpost has over double the fatigue life of any other mountain seatposts.

The Thomson Elite 330-367mm Seatpost is machined from one piece of 7000 aluminum.Post and cradle are machined from one piece of AL- 7000Accommodates seat tube angles of 62 deg or more41mm seat rail grip lengthItem SpecificationsCol orBlackWeight220g Length330mmMateri al7000 AluminumSeatpost Diameter27. 2mmOffset0mmMinim um Height28mmMax Height265mmSeatpo st TypeRigidClamp StyleStd RailsDefined ColorBlack

Visit Our Store Payment Info About Us Contact Us Checkout Thomson Elite 29.8mm x 330mm Black Seatpost This Thomson Elite seatpost accommodates seat tube angles of 62 degrees or more. Post and cradle are machined from one piece of 7000 aluminum 41mm seat rail grip length Color: Black Weight: 220 grams Length: 330mm Material: 7000 Aluminum Seatpost Diameter: 29.8mm Offset: 0mm Minimum Height: 28mm Max Height: 265mm Seatpost Type: Rigid Clamp Style: Standard Rails Bikewagon ID: QBP-S

The Thomson Elite 330-367mm Seatpost is machined from one piece of 7000 aluminum.Post and cradle are machined from one piece of AL- 7000Accommodates seat tube angles of 62 deg or more41mm seat rail grip lengthItem SpecificationsCol orSilverWeight220 gLength330mmMater ial7000 AluminumSeatpost Diameter27. 2mmOffset0mmMinim um Height28mmMax Height265mmSeatpo st TypeRigidClamp StyleStd RailsDefined ColorSilver

Description BRAND NEW Thomson Elite Straight Seatpost Size - 31.6 x 410mm Color - Silver Post and cradle machined from 1 piece 7000 aluminum 41mm rail clamping area. Micro adjust, dual pivoting bolt head 235g @ (27.2x330) Click to Enlarge Click to Enlarge Click to Enlarge We accept paypal only Full payment must be received within 10 days of auctions No restocking fees for returns made within 14 days (Shipping will be deducted for items with free shipping)We ship worldwide We combine multiple it

Thomson Layback Seatpost is over 40% stronger on the ultimate strength test than the strongest production seatposts on the market. Over double the fatigue life of any other production models tested.

Description BRAND NEW Thomson Elite Straight Seatpost Size - 31.6 x 410mm Color - Black Post and cradle machined from 1 piece 7000 aluminum 41mm rail clamping area. Micro adjust, dual pivoting bolt head 235g @ (27.2x330) Click to Enlarge Click to Enlarge Click to Enlarge We accept paypal only Full payment must be received within 10 days of auctions No restocking fees for returns made within 14 days (Shipping will be deducted for items with free shipping)We ship worldwide We combine multiple ite

The Thomson Elite 410mm Seatpost accommodates seat tube angles of 62 deg or more.Post and cradle are machined from one piece of 7000 aluminumAccommoda tes seat tube angles of 62 deg or more41mm seat rail grip lengthItem SpecificationsCol orBlackWeight265g Length410mmMateri al7000 AluminumSeatpost Diameter30. 8mmOffset0mmMinim um Height28mmMax Height335mmSeatpo st TypeRigidClamp StyleStd RailsDefined ColorBlack

We've long been fans of the Thomson Elite seatpost. Why? It's nicely light, it allows you to nose your saddle up/down with infinite adjustability, and it has no setback -- perfect for riders whose less-than-Yoga-mas ter flexibility and/or short femurs cause them to be more comfortable further ahead of the bottom bracket. Nevertheless, Thomson's post is made from aluminum and aluminum has its drawbacks -- you can't make it look much better than sort of cool, and you can't give it the lightness of super high-end carbon fiber.Easton comes to the rescue with their EC90 Zero Setback Carbon seatpost. It's full carbon, including the head, and you get loads of durability thanks to the fact that it makes use of Easton's Taperwall technology. The post and the head are part of a monocoque design... Less

The Thomson Elite 410mm Seatpost accommodates seat tube angles of 62 deg or more.Post and cradle are machined from one piece of 7000 aluminumAccommoda tes seat tube angles of 62 deg or more41mm seat rail grip lengthItem SpecificationsCol orBlackWeight265g Length410mmMateri al7000 AluminumSeatpost Diameter29. 4mmOffset0mmMinim um Height28mmMax Height335mmSeatpo st TypeRigidClamp StyleStd RailsDefined ColorBlack

Over 40% stronger on ultimate strength test than the strongest production seatposts on the market The tube and head of the Thomson seatpost are integral- machined from one single piece of high strength 7000 series aluminum. Natural ellipse bore inside tube for optimum strength to weight ratio. Long 1.614 inch (41 mm) seat rail grip length, this helps prevent seat rail bending from impact loads. Clamp, head, and upper tube strong enough to withstand 350 foot-lbs of torque, under severe impact the Thomson seatpost would bend slightly and allows the rider to come to a safe stop or finish the ride. Lightweight - approximately 188 grams (250 length) for road bikes and 228 grams (330 length) for mountain bikes. Every component of the Thomson seatpost is 100 percent American

The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure.

ITEM Brand-new Thomson Elite seatpost. SPECIFICATIONS Diameter: 31.6 mm Length: 410 mm Type: 0 degree setback Color: Black Weight: 241 grams on our digital scale MSRP: $99.99 INTERNATIONAL BUYERS We do not lower the price on international customs forms. Sorry, this is against international regulations. International buyers are responsible for paying any import taxes, duties, or other fees charged by their country.These fees are not included in this auction's price--please contact your country's c

Description BRAND NEW Thomson Elite Straight Seatpost Size - 27.2 x 330mm Color - Silver Post and cradle machined from 1 piece 7000 aluminum 41mm rail clamping area. Micro adjust, dual pivoting bolt head 235g @ (27.2x330) Click to Enlarge Click to Enlarge We accept paypal only Full payment must be received within 10 days of auctions No restocking fees for returns made within 14 days (Shipping will be deducted for items with free shipping)We ship worldwide We combine multiple items (Actual shipp

The Thomson Elite 330-367mm Seatpost is machined from one piece of 7000 aluminum.Post and cradle are machined from one piece of AL- 7000Accommodates seat tube angles of 62 deg or more41mm seat rail grip lengthItem SpecificationsCol orBlackWeight220g Length330mmMateri al7000 AluminumSeatpost Diameter26. 8mmOffset0mmMinim um Height28mmMax Height265mmSeatpo st TypeRigidClamp StyleStd RailsDefined ColorBlack