Building Supplies

Hand and Power Tools

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Fasco Centrifugal Blower - 115 Volts 1200/1400 RPM Features Sleeve Bearings

Triple Aquastat, Burner Control, Height 6 1/8 In, Depth 3 1/8 In, Width 4 1/3 In, Temp Range 130 - 240 F, Differential 10 Fixed, Full Load Amps @ 120v 7.4, Locked Rotor Amps @ 120v 44.4, Full Load Amps @ 240vac 3.7, Locked Rotor Amps @ 240v 22.2, 24v Burner Control Circuit, Burner Control Circuit @ 24v 1.25 A, Horizontal Or Vertical Mounting, High Limit, Includes Tube Of Heat Conductive Compound And Range Stops

Curtronizer NSF APPROVED OFFICE, RESTAURANT AND FREEZER STRIP CURTAIN DOOR The Perfect Door For Office Or Room Dividers, Restaurants And Freezers. The Curtronizer Strip Door is one of the fastest, easiest strip door kits in the industry. NSF Approved Strip Traffic Doors separate environments from temperature, weather, noise, dust, and other airborne pollutants, making them the perfect doors for office areas, room dividers, restaurants, walk-in coolers, and freezers. USDA Low Temperature Polar Reinforced Strips are for Cooler and Freezer door use (temperature resistant from -20 to +140 degrees F). Pre-punched 6 wide x 0.06 thick strips are mounted on 2 centers allowing for a 67% (2) overlap for secure sealing. Interior strip curtain door kits can be easily trimmed... Less

Hand Amptrol, For Use With Lincoln Electric Pro-torch Tig Torches., Includes 25 Ft.remote Current Control, 6-pin Plug Connection And Velcro Straps.

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Provides the ability to test the 3M Accuspray Spray Gun Model HG09, part number 16570, for HVLP compliance.

9/16ID 1-5/16OD 7/16W STNLESS STL 2PC CLAMP COL

Simplefix Pre-mixed Adhesive And Grout by Custom Building Prod. Ready-to-use product bonds and grouts ceramic floor and wall tile. Bonds to concrete, plaster, drywall, cement backerboards, exterior grade plywood. For interior use only. Do not use on shower floors or areas exposed to prolonged water exposure or steam. Do not use to install fixtures, stone tile, porcelain, Staltillo pavers, or glass tile. As an adhesive use flat side of trowel and apply skim, immediately followed with additional adhesive using notched side of trowel. Let dry 24 to 48 hours before grouting. As a grout, apply with rubber grout float. Let dry 24 hours. Protected with MoldGard Technology to resist mold and mildew growth. Clean tools and hands with water before material dries. If haze exists on tile, remove it... Less

Mannington Marrakech Moroccan Hickory Cumin 3/8" x 2 1/4", 3" & 5" Random Width Engineered Hardwood MMH05CU1

Vestige widespread hex wrench

Uvex SEPTLS763S2154 Patented MMT Multi-Material Technology provides soft, cushioned comfort. Wrap-around 8-base lens design offers exceptional coverage. Ratcheting temple angle adjustment. Ventilation channels minimize fogging. Elastomer nasal pads minimize slippage.

20" Head Assembly - 2670 CFM 5 Mounting OptionsGuard Meets OSHA StandardsGalvaniz ed Steel Propeller15 Foot Three Conductor Supply Cord and PlugNon- oscillating, 1/15 HP, 2 Speed, 115V, 1 Phase, Totally Enclosed Air Over Ball Bearing MotorUL/CUL Listed3 Year Warranty 24.00 L. 24.00 W. 10.00 H.

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Tig Welder, Ac/dc, Phase 1 Or 3, Output Range 3-350 Amps, Rated Output 300 A At 32 V, 300 A At 32 V Amps Ac, Input 43-17 Amps, Input Voltage 230-575, Ocv 75 Or 10-15, 50/60 Hz, Includes Power Source, 8 Ft Power Cord, 2 Dinse Connectors, Set-up Dvd, Runner Cart, Coolmate 3.5, And Rfcs-14hd Foot Control. Plus 4 Gallons Of Coolant, 25 Ft. Cs310 Water Cooled Torch With Accessories, Regulator Flowmeter With Gas Hose, Torch Adapter,and Weld Lead With Clamp

Shop for Hardware & Fasteners at The Home Depot. A drill bit for securing or removing screws with a spanner drive. The shank on this bit is 1/4 in. The spanner drive is selected for security applications.

Drain Plug Stopper Garbage Disposal Sink n Hex Wrench (Click to Enlarge) (Click to Enlarge) (Click to Enlarge) (Click to Enlarge) Description Replacement InsinkErator/Garb age diposal drain plug stopper for sink, hex wrench, and also includes instructions for installing and uninstalling InsinkErator garbage disposal if you needed to.The stopper is designed to stop water and food particles from going down the drain. The hex wrench is a quick, effective tool to help free simple jams. Insert the he

Explosion Proof High Pressure Exhaust Fan - 24" This High Pressure Exhaust Fan removes fumes, dust and smoke. Direct driven exhaust fan is ideal for mills, mines, foundries & factories. Fan blades are made of heavy duty one-piece cast aluminum to provide spark-free operation. Frame is made of heavy duty steel venturi that is completely arc welded with tubular supports. Exhaust fan features explosion proof ball bearing motor. Gray enamel finish. Single phase design. Horsepower rating based upon maximum speed/load.

85-Degree to 125-Degree Adjustable Solid Brass Hinge Pin Door StopThis 85-Degree to 125-Degree adjustable solid brass hinge pin door stop prevents the doorknob or lever from impacting with the wall, causing damage. Available in many different lengths and styles to fit your application. It is very durable and sturdy to withstand many different doors.Features:For use On Hinged Doors Where The Installation of a Standard Door Stop is Not DesirableDesigned for Narrow Trim InstallationHigh Quality Rubber Bumpers - Shoulder On Stud Supports Rubber Through Entire Body for Engineered CushioningReplace able, Non-Marring Rubber TipsRemovable Bushings Accommodate 1/4" to 5/16" Diameter Hinge PinsEasy Installation- Only a Screwdriver RequiredMade From Solid BrassMeets ANSI/BHMA A15616Door Openings... Less

Bulldog Hardware Pegboard Starter Kit: Easy solution to garage organization Panels link together for custom configuration Built-in spacers allow you to install pegboard directly into the wall Fits standard peg hooks Contains: 4 plastic pegboard panels, 6 panel connectors, four 2" peg hooks, two 4" peg hooks, a 4" double peg hook, two 6" brackets, six 3/4" curved peg hooks, six 1-1/2" curved peg hooks, five 3/4" angle peg hooks, five 1-1/2" angle peg hooks, 2 twist-top parts bins, 2 parts trays, 3 screwdriver holders, multi- screwdriver holder, multi-tool holder, 3 pliers holders, 20 wood screws, and 20 plastic anchors for installation

Quart Ready-To-Use Patching Plaster by DAP A premixed, value priced, gypsum-based plaster patching product for everyday household repairs such as plaster and drywall. Dries in approximately 1 hour to a hard finish with minimal shrinkage (drying time is affected by temperature and depth of area). No mixing required. Tub is re-sealable for convenient storage. Apply to the surface area with a trowel or putty knife. Recommended for interior use only. White. Quart. Covers approximately 48 to 72 sq.

UCH N FOAM SPRAY APPLICATOR GUN, Black Heavy Duty design with a sleek needle valve construction, easy pull trigger, and custom adapter tip. This unique top-loading connector makes even the toughest applications possible with just one hand! Touch n Foam Applicator Spray gun is compatible with Tytan Professional Foam Sealer. TYTAN PROFESSIONAL OUTDOOR & RV- PRO - "BLACK FOAM" is a ready to use, easy to apply, one-component polyurethane foam specially formulated to fill, insulate and seal gaps, cracks, openings and blend in with Recreational Vehicle undercarriages and outdoor landscaping applications The TYTAN PROFESSIONAL OUTDOOR & RV- PRO Formula creates a durable airtight seal, stops air infiltration, pests, and saves energy. It provides excellent adhesion to most surfaces and materials... Less

Collated Staple, Stick, Collation Type Adhesive, 15 1/2 Gauge, Crown 1/2 In, Length 2 In, Chisel Point Type, Smooth Shank, Steel, Coated Finish, For Use With 4wk99, Package Quantity 7728

Wall Unit Black/Chrome - 24" "Out of Service" Yellow w/ Clamp and Belt End This Black/Chrome Clamp Mounted Tensabarrier Wall Mount Unit, measuring 3.25 inches wide and 5.5 inches tall, conveniently comes with a 24 foot long yellow belt that features the text "Out of Service" in black lettering across it's center. The unit comes complete with a separate wall receiver for attaching the end of the belt to an opposite location and wire clamp belt. This retractable barrier is perfect for blockading hallways, doorways or in sitations where conserving floor space is optimal. 8.00 L. 8.00 W. 8.00 H.

The Handler 125 operates off 115-volt household current. Comes ready to weld without shielding gas using .030-.035 in (0.8-0.9 mm) flux cored wire. MIG-Ready means This welder...

Adorn your doors, cabinets and other furniture with the rustic style of these hand-forged iron clavos. Sold in set of 6 clavos. Made of hand-forged iron. Available in three sizes: Small: 3/4" L x 3/4" W head with 1" long shank. Medium: 1-1/4" L x 1-1/4" W head with 1" long shank. Large: 1-1/4" L x 1-1/4" W head with 3" long shank. Sold in set of 6 clavos. Easy to install. Simply drill a small pilot hole and tap in with a rubber mallet. For decorative purposes only. Shown in Natural Black finish. Rust finish is actual oxidized iron, a living finish.

Industrial Water & Trash Pumps Powered by reliable Honda engines with automatic low oil shut down guard. Heavy duty self-priming pumps. Corrosive resistant seals. Durable cast iron impeller. All sales are final.

120 Volt Variable Speed Spiral Saw Kit - RZ2000-55. XSHIELD 2 Flush Guard Attachment. Multi-Purpose XBIT. Drywall XBIT. Metal Zip Wheel. Collets - 1/8-in, 5/32-in, 1/4-in. Accessory Case. Premium Storage Bag & 120 Volt Variable Speed Spiral Saw Kit - RZ2000-55. XSHIELD 2 Flush Guard Attachment. Multi-Purpose XBIT. Drywall XBIT. Metal Zip Wheel. Collets - 1/8-in, 5/32-in, 1/4-in. Accessory Case. Premium Storage Bag

Explosion Proof High Pressure Exhaust Fan - 24" This High Pressure Exhaust Fan removes fumes, dust and smoke. Direct driven exhaust fan is ideal for mills, mines, foundries & factories. Fan blades are made of heavy duty one-piece cast aluminum to provide spark-free operation. Frame is made of heavy duty steel venturi that is completely arc welded with tubular supports. Exhaust fan features explosion proof ball bearing motor. Gray enamel finish. Single phase design. Horsepower rating based upon maximum speed/load.